Audix Vocal Condenser Microphones

Sales of Audix VX-5, VX-10, CX-112, HT2, SCX-One, and SCX-25 condenser microphones at Sweetwave Audio. For assistance, call us at 1-877-258-0563.

Audix VX-5 New

The Audix VX-5 is a stylish and innovative hand-held vocal condenser microphone designed to handle a wide variety of live, studio and broadcast applications. With a smooth frequency response of 40 Hz - 16.5 kHz (plus or minus 3 dB), the VX-5 features a 14mm gold vapor diaphragm, a supercardioid polar pattern, a -10 dB pad, a bass roll-off filter, an acoustically ported steel mesh grill screen, and a rugged die cast zinc body. The Audix VX-5 will handle sound pressure levels in excess of 140 dB (in the pad and roll-off position) without distortion and will additionally provide over 20 dB of ambient noise rejection for feedback control on live stages. The VX-5 operates on phantom power of 9-52 volts and will achieve optimum results when used with a high quality mic preamp. In addition to vocal applications, the VX-5 is ideally suited to capture acoustic instruments such as guitar, woodwinds, brass, percussion toys, and drum overheads. and hi-hat.

Operation and Maintenance: Condenser microphones as a general rule are much more sensitive and reactive than dynamic microphones and should be handled with care. Avoid extreme temperatures wherever possible. Moisture and high humidity can adversely effect the performance of the microphone and cause permanent damage. For outdoor use consider using an outer foam windscreen to help reduce wind noise or popping. When not in use, please store your mic in the pouch or case provided at room temperature.

VX-5 Spec Sheet (PDF)

Audix VX-10

The Audix VX-10 is a true condenser microphone designed to set new performance standards in the areas of live sound and broadcast applications. With a smooth uniform response over a frequency range of 40 – 20k Hz, the VX-10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism. The VX-10 will handle close miking with minimal proximity effect and will not lose signal if the user is slightly off-axis from the front of the microphone. A cardioid pattern provides excellent gain before feedback and, even with it's extended low end response, the VX-10 offers sonic clarity without “boominess” in the lower mids – usually difficult to attain with live vocals.

The VX-10 operates on phantom power of 48 – 52 volts and will achieve optimum results with a high quality mic preamp. Low noise electronic circuitry, low impedance, and balanced output allow interference-free performance even with long cable runs.

Operation and Maintenance: Condenser microphones as a general rule are much more sensitive and reactive than dynamic microphones and should be handled with care. Avoid extreme temperatures wherever possible. Moisture and high humidity can adversely effect the performance of the microphone and cause permanent damage. For outdoor use consider using an outer foam windscreen to help reduce wind noise or popping. When not in use, please store your mic in the pouch or case provided at room temperature. Capsule replacement: The VX-10 is designed with a field replaceable threaded capsule. For this reason, it is possible to carry spare capsules to insure against the unexpected. Simply unscrew the capsule in order to repair or replace. Call the Audix service department direct for any repair work.

VX-10 Spec Sheet (PDF)

Audix CX-112

The Audix CX-112 is a true condenser microphone with a contemporary design and excellent performance characteristics. With a rich, full-bodied sound delivered by its one-inch gold sputtered capsule, the CX-112 is a single-patterned cardioid condenser that serves a variety of applications for project studios, professional audio production, and live stage performances.

Delivering a smooth uniform frequency response from 20 Hz - 20 kHz, the CX-112 is equipped with switches for 10 dB pad and a bass roll-off. With 10 dB pad engaged, the CX-112 is capable of sound pressure levels of 145 dB, allowing the microphone to be used successfully on everything from subtle acoustic instruments in a studio to screaming guitar cabs on a concert stage.

The Audix CX-112, which is designed with a discreet low noise preamp circuitry, operates on phantom power of 48-52 volts. Optimum results will be achieved by using the CX-112 with a high quality mic preamplifier and premium quality microphone cable.

Features

• One inch gold-sputtered diaphragm
• Low noise electronics
• 10 dB pad and bass roll-off
• Rich warm tones - ideal for digital recording
• High power handling of 145 dB SPL
• Adjustable metal clip allows for secure positioning
• Excellent for vocals, piano, overheads, guitar cabs, percussion, and acoustic instruments of all types

CX-112 Spec Sheet (PDF)

Audix HT2

Headset Supercardioid Condenser Microphone with Battery

The Audix HT2 is a professional headset microphone that offers excellent off-axis rejection, often difficult to achieve with mics of this type. Made of a composite molded material, the headset is extremely lightweight, padded for comfort and completely resistant to moisture. Its adjustable, behind-the-head design assures a secure fit. The microphone is designed for optimum sound off-center of mouth and will stay in place, allowing for easy, unobstructed movement. An adjustable gooseneck allows for precise positioning. The Audix HT-2 can be used with wireless transmitters or as a standalone cabled microphone with phantom power.

Audix SCX-One

The Audix SCX-One system is a high quality transformerless studio condenser microphone, designed for use with any of four interchangeable capsules.

The SCX-One incorporates the latest Surface Mount Technology making it compact and durable enough for years of reliable performance both in the recording studio, as well as for sound reinforcement or broadcast use. This microphone provides exceptionally flat response and low noise, operating on standard phantom power of 48-52 volts DC.

The extended response at both ends of the spectrum and high SPL handling allows the SCX-One to be used in the most critical audio applications. Polar patterns include omni, omni-presence, cardioid, and hypercardioid. Matched pairs may be special ordered for stereo use.

Applications

• acoustic piano, acoustic guitar
• string instruments and woodwinds
• orchestral, choir and stage
• voice, narration
• drum overheads, high hat or snare (with optional pad)

SCX-One Spec Sheet (PDF)

Audix SCX-25

The Audix SCX-25 is a true condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock mounted within an intricate machined brass ring, the SCX-25 capsule is completely isolated from the mic body and the electronics. By successfully minimizing acoustic reflections and diffractions, SCX-25 delivers a pure, open-air sound unlike any other microphone.

Delivering a smooth uniform frequency response from 20 Hz–20 kHz, the Audix SCX-25 will reproduce vocals and acoustic instruments with exceptional detail and realism. The SCX-25 is very consistent when responding to incoming off-axis signals, exhibiting excellent phase coherence and minimal proximity effect.

By employing miniaturized low noise components, the preamp circuitry for the SCX-25 is housed within a brass microphone body which is merely 4 inches long. The result is the smallest footprint of any large diaphragm microphone to date, allowing the SCX-25 more convenience and freedom when it comes to mic placement. And because of the internal capsule suspension mounting system, the need for costly shock mounts is eliminated and set-up time is greatly simplified.

The SCX-25 operates on phantom power of 48–52 Volts. Optimum results will be achieved by using the SCX-25 with a high quality mic preamplifier and premium quality microphone cable.

Applications

• Studio vocals, lead and backing
• Voice over
• Choir
• Ambient room mic
• Drum overheads
• Orchestra
• Bells, chimes, marimba, vibes
• Acoustic instruments (piano, sax, strings, guitar, flute)

Features

• Innovative design
• Isolated capsule suspension system
• Miniaturized pre-amp
• Extremely small footprint (brass body only 4 inches long)

SCX-25 Spec Sheet (PDF)