 |
The Electro-Voice RE27N/D is a professional-quality dynamic
cardioid microphone designed for broadcast production
announce and voice-over, high-quality recording and sound
reinforcement applications. The RE27N/D utilizes a
revolutionary neodymium-alloy magnet and a reinforced
diaphragm dome, a combination offering increased sensitivity
(up to 6-dB more output), undistorted output at high sound
pressure levels and an extended high-frequency response.
The exceptional sensitivity of the RE27N/D, excellent transient
response and inherently low noise of the dynamic transducer,
all combine to ensure a superior signal-to-noise ratio, easily
comparable to the finest condenser cardioid microphones. to
further reduce noise, a highly effective hum-bucking coil is
used to attenuate hum from lighting and other sources. The
RE27N/D's continuously Variable-D, design reduces bassboosting
"proximity effect" to maintain a uniform low-frequency
response, up-close or at a distance. Two easily operated bass
roll-off switches, offering a sharp low-frequency cut at 200 Hz
or a gentle roll-off, are available for special situations where
bass attenuation is required. A third switch is available for
reducing the high-frequency treble boost. The true, uniform
cardioid polar pattern of the RE27N/D offers the greatest
rejection at 180° off axis, insuring superior gain-beforefeedback.
An integral blast and wind filter covers each acoustic
opening on the RE27N/D, allowing "close-talk" situations with
no worry of "P-pop," breath sounds or excessive sibilance.
Part of the filter also shock mounts the internal microphone
transducer, reducing the transfer of vibration from external
sources. This shock-mount system along with the extremely
rugged exterior steel casing allows the RE27N/D to withstand
all the rigors of professional use.
Key Features:
- Studio condenser performance from self-generating
transducer
- Consummate announce microphone
- Ideal for sampling
- Switch-selected E.Q.
- Effective internal shock, pop and wind
protection
- Exceptional sensitivity assures high signalto-
noise
Applications
- Accordion, Acoustic Strings, Brass, Choir, Guitar Amp, Kick Drum, Snare,
Speech, Tom, Woodwinds
Specifications
| Element |
Dynamic |
| Polar Pattern |
Cardioid |
| Impedance, Low-Z balanced |
150 Ohms |
| Connector Type |
3-pin XLR |
| Open Circuit Voltage |
3.1 mV/Pascal |
| Finish |
Satin Nickel |
| Case Material |
Steel |
| Weight Net |
709 g ( 25.01 oz ) |
| Dimensions (Height X Max Diameter) |
217 x 54 mm
(8.54" x 2.13") |
Specifications
/ Datasheet (pdf) |