Electro-Voice
EV Speakers
EV Microphones

Electro-VoiceTS940D-LX Cinema Speaker System

In the TS940D, Electro-Voice has combined its expertise in constant-directivity horns, high-frequency compression drivers and lowfrequency speakers and enclosures to produce a compact, easily installed theatre stage system with superior performance in all areas: uniform dispersion to the higheest frequencies, high efficiency, high power capacity and wide, smooth frequency response.

The TS940D matches the only second-generation constant-directivity high-frequency horn to a world-class high-frequency driver, providing accurate reproduction and coverage of frequencies from500 Hz to 20,000 Hz. Electro-Voice invented constant-direectivity technology, first introduced in our HR series horns in 1974. The HP horn is the TS940D is a significant refinement. Constant directivity means that all frequencies are enenly spread over the horn's rated coverage angle, so that every seat in the house can receive booth clear dialogue and subtle high-frequency effects. For low frequencies, two 15- inch woofers are vertically stacked in a direct- radiating configuration, providing a coverage pattern thatlosely matches that of the high-frequency horn in the crossover region. Such a match is not possible with more traditional horn-loaded bass enclosure. The high excursion woofers, mounted in an optimally vented, Thiele-Small enclosure, provide highimpact bass from 40-500 Hz, at average powers up to 800 watts, when required. In the field, the TS940D's combination of high- and low-frequency reproduction has proven to be an excellent choice for small to medium sized houses.

The TS940D incorporates a number of installer- recommended features, for quick, trouble-free and low-cost installation. Among these features is a dedicated crossover/ equilizer that is easily flush mounted in the pre-sized, pre-drilled hole located in the side of the low-frequency enclosure. Side mounting provides easy wiring access when the system is installed against a wall. Through the use of the horn mounting kit and predrilled holes in the low-frequency system, the high-frequency section is easily mounted in the proper position on top of the low-frequency section. All pre-drilled holes are Tnut loaded, including bass driver mounting holes. This means quick and easy driver replacement. All components of the TS940D are finished in matte black, to eliminate any reflections back through the screen.

Specifications

Datasheet (pdf)
More Info