Lab.gruppen C Series Install Amplifiers

Lab.gruppen C Series offers extraordinary versatility with a feature set that enables complex systems to be designed, configured, installed, and commissioned without the need to source and manage an extensive number of purpose-specific products. To provide cost engineered solutions for any size of reinforcement project - without compromising on sound quality – that's the goal of the Lab.gruppen C Series.

The C Series is comprised of eight models providing four or eight discrete and powerful channels of highly configurable Lab.gruppen-quality amplification in only 2 rack spaces. All models provide for the individual adjustment of maximum voltage peak output and gain per channel and bridge-mode operation per channel pair. Advanced NomadLink® networking, remote monitoring and control facilities come standard.

C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL), which allows the output to be optimized for any loudspeaker load – whether one massive subwoofer or a series of small 100/70 V loudspeakers. VPL works in combination with adjustable input gain to achieve maximum headroom regardless of input levels or output impedances.

Every C Series is ready for the NomadLink® network right out of the box. With NomadLink®, key amplifier parameters are displayed via DeviceControl PC software, and remote control of channel mutes and power on/off is under network control.

Sales of Lab.gruppen C series install amplifier models C 68:4, C 48:4, C 28:4, C 16:4, C 16:4, C 10:4X, C 5:4X, C 20:8X, and C 10:8X. All C series amps come with DeviceControl PC software standard. Need assistance? Call our technical or sales staff at 877-258-0563.

Lab.gruppen C 68:4

The C 68:4 delivers an amazing 4 x 1700 W at 4 ohms making this amplifier powerful enough for the most demanding of installed sound applications. Packaged in only 2U this is extreme power-density - arguably the highest and most impressive for an installation-dedicated amplifier.

Lab.gruppen C 48:4
The C 48:4 is the second largest amplifier in the C Series family, delivering an impressive 4 x 1200 W at 4 ohms packed into a 2U chassis.

Lab.gruppen C 28:4
The C 28:4 is the mid-power amplifier in the C Series family providing 4 x 700 W output into 4 ohms loads, packaged in a 2U chassis.

Lab.gruppen C 16:4
The C 16:4 is the smallest amplifier in the C Series family with 400 W per channel delivered at 8 ohms loads; nevertheless it includes all the features and benefits of its more powerful companions.

Lab.gruppen C 20:8X

The C 20:8X is the largest 8-channel amplifier in the C Series family, delivering an impressive 8 x 250 W* at 4 ohms, 8 ohms, 16 ohms or 70 Vrms (500 W at 100 Vrms is available by bridging two channels) from a 2U chassis.

C 20:8X Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 70 V loudspeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 4-channel blocks) to achieve maximum headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in each 4-channel section.

Every C Series amplifier is ready for the NomadLink® network right out of the box. With NomadLink®, key amplifier parameters are displayed via DeviceControl PC software, and remote control of channel mutes and power on/off is under network control.

* Maximum continuous output power, all 8 channels driven, VPL set at 100 V and Gain set at 32 dB.

Spec Sheet

Lab.gruppen C 10:8X

The C 10:8X is an 8-channel amplifier that delivers 8 x 125 W* at 4 ohms, 8 ohms, 16 ohms or 70 Vrms (250 W at 100 Vrms is available by bridging two channels) from a 2U chassis.

This amplifier is uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 70 V loudspeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 4-channel blocks) to achieve maximum headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in each 4-channel section.

Every C Series amplifier is ready for the NomadLink® network right out of the box. With NomadLink®, key amplifier parameters are displayed via DeviceControl PC software, and remote control of channel mutes and power on/off is under network control.

* Maximum continuous output power, all 8 channels driven, VPL set at 100 V and Gain set at 32 dB.

Spec Sheet

Lab.gruppen C 10:4X

The C 10:4X is a versatile 4-channel amplifier, delivering 4 x 250 W* at 4 ohms, 8 ohms, 16 ohms or 70 Vrms (500 W at 100 Vrms is available by bridging two channels) from a 2U chassis.

This amplifier is uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 70 V loudspeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 2-channel blocks) to achieve maximum headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in each 2-channel section.

Every C Series amplifier is ready for the NomadLink® network right out of the box. With NomadLink®, key amplifier parameters are displayed via DeviceControl PC software, and remote control of channel mutes and power on/off is under network control.

Spec Sheet

Lab.gruppen NomadLinkBridge NLB 60E

The NomadLinkBridge NLB 60E acts as a subnet master for up to 60 units of networked C Series or FP+ amplifiers. Bridging between the NomadLink daisy-chained network and standard Ethernet/LAN, the NLB 60E provides utilization of any standard Ethernet architecture when connecting a PC running the DeviceControl software. If desired, the PC can be disconnected after a subnet of amplifiers is created and adjusted, and the NLB 60E maintains and monitor the network instead. With the user interface of the NLB 60E it is possible to power on/off the amplifiers as needed, as well as navigate through and monitor various features on the display.