On-Stage Lighting Stands

Sales of On-Stage lighting stands at Sweetwave Audio, an authorized dealer. Call one of our experienced technical or sales staff at 877-258-0563.

On-Stage LS/SS7770 - 10ft. Universal Stand

This heavy-duty universal stand can be used as a Lighting Stand or a Speaker Stand! This 3-shaft, 2-clutch design allows for maximum height adjustments up to 10 feet and will support up to 140 lbs. The reversible top shaft design on this steel-aluminum stand may be used with either 1 3/8” or 1 1/2” speaker cabinets or lighting bars. The double brace leg supports, extra long legs and locking pin make this stand extremely sturdy and safe.

Features

• Reversible upper shaft fits both 1 3/8” or 1 1/2” inserts!
• Tension locking knobs adjust height up to 10 Feet!
• Extra long legs, a wide base spread and double brace leg supports make this stand extremely sturdy and safe!

Product Specifications

• Height Adj.: 44”-120“
• Weight Capacity: 140 lbs.
• Upper Shaft Tubing: 1 3/8” or 1 1/2“
• Base Spread: 38”-58”
• Construction: Steel and aluminum
• Color: Black Powder Coat Finish

Data Sheet (pdf)

On-Stage LS7720BLT Lighting Stand with Side Bars

This classic stand allows for maximum
height adjustments and will support up to
8 par cans. The stand adjusts with friction
adjustment knobs and the locking pins
can be used for added security. The top
T-bar holds up to 4 par cans, while the
side mount bars will hold an additional
4 par cans.

Specifications

• Weight Capacity: 110 lbs.
• Height Adjustment: 60”-120”
• Base Spread: 48”
• Construction: Hi-grade aluminum
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LS7730 Lighting Stand w/ Truss

A low-cost alternative in lighting stands that can hold a total of 16 par cans! Includes two tripod base lighting stands with 3 section shafts and T-bars. T-bars hold 4 par cans each. Also includes two 5’ truss sections, holding 4 par cans each, for a total of 16 par cans. Easy assembly with screw on plastic brackets and thumb screws which allow for height adjustments. Use only for static lights.

Specifications

• Weight Capacity: 200 lbs.
• Max Height: 11.5’
• Base Spread: 48”
• Construction: Hi-grade aluminum
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LS7740-QR Lighting Stand w/ 2 Quick-Release Bars

Set-up and tear down takes only seconds with this quick and easy stand!
Mount the par cans to the front of the bar, nest them as close as you would
like and there are no braces to get in the way! Includes 2 Quick-Release
Bars and an additional 2 bars can be added for up to eight more par cans.

Specifications

• Weight Capacity: 140 lbs.
• Max Height: 10 1/2’
• Base Spread: 48”
• Construction: Aluminum Stand. Die-cast steel quick-release clutch. Heavy-duty square tubing bar.
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LS7805B POWER Crank-Up Lighting Stand

By far the easiest method of raising a lighting system 80” off the floor.
The easy-to-use power crank-up height adjustment system operates with
any standard electric or cordless drill. The 48” top T-bar holds up to 4
par cans, while the two 24” side mount bars each hold 2 par cans , for a
total of 8 par cans.

Specifications

• Weight Capacity: 80 lbs.
• Height Adj.: 56”-138”
• Base Spread: 48”
• Construction: Steel
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LS9790 Lighting Stand with 10-Foot Truss

Our top-of-the-line pro-quality lighting stand includes 2 tripod base lighting
stands with triple telescoping shafts and T-bars. T-bar assemblies are 48”
and will hold 4 par cans each. Includes 14 sets of mounting hardware with
room for 10 more. Heavy-duty metal clamps and all-steel construction
make this stand a perfect choice for high-end use!

Specifications

• Weight Capacity: 400 lbs
• Max Height: 11.5’
• Base Spread: 40”
• Construction: All-Steel
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LSB6500 Lighting Stand Bag

Crafted from heavy-duty padded nylon, the LSB6500 comes with a
heavy-gauge 2-pull zipper, so that the bag can be opened with ease
from the center. Two hand straps ensures a well-balanced load and the deluxe corded piping gives the bag its rigid shape. This bag also features an adjustable, padded shoulder strap for ease of carrying.

Specifications

• Material: Heavy-duty padded nylon
• Dimensions: 62” x 13” x 9”
• Color: Black

Spec Sheet (pdf)

On-Stage LT9000 10-Foot Quick-Release Lighting Truss

This truss system includes two 5-foot sections that lock together to form a complete 10-Foot Truss. Then easily, safely and quickly attach this to your lighting stand truss by opening the quick-release clamp and wrapping it around your lighting stand or hanger shaft. Turn knob to tighten and your in business! Recommended with two LS/SS7770 10-Foot Stands. Mounting hardware included.

Specifications

• Weight Capacity: 450 lbs.
• Width: 11’
• Tubing: 35mm Square Tubing
• Color: Black Powder Coat Finish
• Included: Mounting Hardware

Spec Sheet (pdf)

On-Stage LTA7000-QR Quick-Release Lighting Bar

This extremely versatile bar is quick to assemble and is perfect for DJ or rock-and-roll lighting professionals everywhere! Pars can either hang from the bottom or be mounted in front of the bar. And, only this unique design folds in half for easy storage and portability. The 35mm square tubing is stronger than round tubing and will hold more weight without bending.

Specifications

• Weight Capacity: 80 lbs.
• Length: 48”
• Construction: All-steel
• Tubing: 35mm Square Tubing
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LTA9000 5-Foot Quick-Release Lighting Truss Center Section

Lock this Center Section between the LT9000 10-Foot Truss System fora total of 15-feet of truss support. Assembly is quick and simple with this uncomplicated design. All pieces are interchangeable and will always line up with one another. Each section will hold an additional 8 par cans or up to 200 lbs.

Specifications

• Weight Capacity: 200 lbs.
• Width: 5’
• Tubing: 35mm Square Tubing
• Color: Black Powder Coat Finish
• Included: Mounting Hardware

Spec Sheet (pdf)

On-Stage LTA9500 Hanging Lighting Truss Support Bar

Use this Support Bar to hang the LT9000 Lighting Truss. Securely attach suspension cable through eyelet on one end and on the other end clamp the LT9000 Truss using the Quick-Release functionality. Slide security pin on the LT9000 through pin holes on the Support Bar.

Specifications

• Length: 32”
• Construction: Heavy-duty 38mm steel tubing with 2mm thick wall.
• Color: Black Powder Coat Finish

Spec Sheet (pdf)

On-Stage LTA9790BCS 5-Foot Lighting Truss Center Section

Lock this Center Section between the LT9790 Lighting Stand with 10-Foot Truss for a total of 15-feet of truss support. Assembly is quick and simple with this uncomplicated design. Each section will hold additional par cans or up to 100 lbs. The heavy-duty metal clamps and all-steel construction on this stand make this system a perfect choice for high-end use!

Specifications

• Weight Capacity: 100 lbs.
• Width: 5’
• Construction: All-steel Color: Black Powder Coat Finish
• Included: Mounting Hardware

Spec Sheet (pdf)