20 input 1kW powered console
The PA20-CP are sturdy, "walk up and go" powered mixers, guaranteed to deliver loads of weighty power from their 'Constant Power' amplifiers. These well thought-out mixers offer operational flexibility for any live sound situation and engineers of any experience.

The Allen and Heath PA20-CP ships with mains leads, user guide, A&H stickers

Some features include: 

Constant Power Amplifiers: 1kW i.e. 2 x 500W RMS peak power professional class AB power amplifiers built in. Unique ALLEN&HEATH design gives full output into 4 OR 8 ohms [rear switch selector]. Output is to locking Speakon™ connectors. Thermal management twin fan system. Full protection - input limiter to prevent clipping, short circuit protection, current limit and DC fault sensing. LED indication of: signal presence, peak warning, speaker protect and temperature. AB amp input TRS break-jacks [normalised to output section / slave out jacks] allow independent use of the power amplifiers if desired. Standby mode switch puts amplifier into protect with speakers isolated.

4-band EQ: Shelving LF [60Hz], and HF [12kHz]. Fixed LM [250Hz], and swept HM [300Hz - 6kHz]. The fixed 250Hz control has been carefully selected to provide reduction of ‘muddy’ sounds and enhance ‘warmth’

Digital FX: 16 program digital FX processor provides reverbs, delays, chorus and others, inc combined. This FX module takes its feed from the post-fade FX aux on the mono & stereo channels. The output of the FX module is controlled by a 100mm fader with mute & PFL and is routed to the stereo mix and FB1&2 with post fade level controls. At this point, 2 TRS inputs with level control provide a way of combining external FX with the internal unit. Internal FX unit can be switched off to use external only if preferred. A footswitch TRS jack is provided to mute the FX channel. Editing of FX can be done via MIDI using ALLEN&HEATH software editor.

For more info, visit the Allen & Heath website: PA20-CP