Transducer type
|
True electrostatic |
| Operating principle |
Pressure gradient |
| The diaphragm’s active diamete |
21 mm (0.8”) |
| Frequency range |
20 Hz to 20 kHz |
| Polar pattern |
Unidirectional - cardioid |
| Electronics type |
Discrete solid state (SS) |
| Output impedance |
50 ohm |
| Rated load impedance |
1000 ohm |
| Suggested load impedance |
>250 ohm |
| Sensitivity at 1 kHz into 1 kohm load |
12 mV/Pa |
| S/N Ratio CCIR 468-3 weighted |
70 dB |
| S/N Ratio DIN/IEC 651 A-weighted |
80 dB-A |
| Equivalent noise level DIN/IEC A-weighted |
14 dB-A |
| Maximum SPL for 0.5% THD at 1 kohm load |
144 dB |
| Dynamic range of the microphone preamplifier |
130 dB |
| P48 Phantom powering IEC 268-15A |
+40 to +52 V on XLR pins #2 & #3
relatively pin #1 |
| Phantom current consumption |
<1.5 mA |
| Output connector |
3-pin XLR male, gold plated contacts |
| Signal polarity |
Positive toward pressure on a diaphragm produces positive polarity voltage on XLR's pin #2 relatively to pin #3 |
| Dimensions, weight |
207 mm x 42 mm / shaft 24 mm, 250 g |
Home | Contact | Sales | Installations | Contracting & Sound Production | Backline
Rentals | Specials | Package Deals
